Halo Noble 6 (Mk V [B]) helmet Kit! DIY! Physical Item! Cosplay, Costume, Halloween, etc…

Dispatch time ranges from “same day” to 3 days!

Noble 6 (Mk V [B]) helmet Kit - DIY

Default scaled to fit up to 25" circumference heads!

Scale : printed at default scale, so this should fit up to a 25 inch circumference head. I did try it on, and I have a 23 inch circumference head. So I can say for sure it can fit ahead up to 23 inch circumference easily. I’m not sure if every 25 inch circumference head will fit through the bottom. I’ve enclosed a template picture so you can use a piece of cardboard to rough out the size and create a template for yourself to see if it will fit over your head. (6.5 inches side to side, and 9.5 inches front to back. It’s actually slightly larger than these measurements.)

If it can’t fit over someone’s head, they could also use elastic, Velcro, or magnets, in order to keep one part separate to create a much larger opening to put it on.

Important!
——
Raw Pla print. Will need post processing work.
It’s a kit, and it comes in pieces.
Very simple to assemble!
——

Add a jar of our filler paint for 10.00!

The paint add-on for $10, is a filler paint to help you smooth the print and finish it. (Check the youtube links)
The paint add on for $10 IS NOT colored paint for you to finish painting the model.
The paint add-on for $10 IS NOT for a finished painted model. (I can’t finish this and paint it for you for $10. 🙂)

Youtube demo video link below as well as other videos on my channel.

https://youtu.be/UmstwPX-Vd8

https://youtu.be/3Rb0iyioiUw

——

Made from PLA Filament, plastic made from corn-starch or sugar cane. It is 100% biodegradable, and non-toxic. 3D printed products made with PLA are durable, strong, and make useful items that hold up to real life.

I’ve tried to remove all the printing supports, but it’s possible I missed one.

This is not a completed model. It’s a model kit and comes in pieces.

There are no instructions, but the pieces will only fit together one way, and it’s pretty intuitive. Just be careful you don’t glue it together in the wrong order and find you’re unable to fit the last piece in. Plan it out ahead of time.

PLA models are not the same as resin models. PLA can look just as well on the finished product though. But to achieve the best results requires sanding, crack filling, and a great paint job.

Modelling:

The perfectionist: they will clip, file, and sand every piece. Then glue each piece together filling any gaps with gap fill. Then prime and paint and varnish.

The semi perfectionist: they will file and sand most pieces. Then glue and fill the large gaps. Then prime and paint and varnish.

The painter: they will glue the model together, and fill the large gaps. Then prime and paint and varnish.